- Specification
MIX2000: Pre-set Warm Water Blender
Manually pre-set Hot / Cold, water mixing manifold. The temperature is pre set at the time of installation providing a set water tempersture for future use. Ideal for taking the chill of the water and providing a warm water supply to your bidet shower. Please NOTE this is a basic proportional hot and cold water blending device and is NOT thermostatically controlled.
* For concealed or surface installation
* Not thermostatically controled
* Requires minimum 0.5 bar water pressure
Ideally suited to combination systems.
There are two adjustable ports, one on the cold water inlet, one on the hot water inlet, these are adjusted with a screwdriver at the time of installation to create the right balance of hot and cold water flowing in to the mixing manifold to create the desired water outlet temperature. An inexpensive way of taking the chill of the water and providind a warm water supply to your bidet shower.
- Additional Images/Info
Click on the image to enlarge it
- Product Review
-
Customer Reviews:
There are yet no reviews for this product.
Please log in to write a review.
